GRISOTUB MS

Fast and easy to false with the manual or Semi-automatic closing system for metal tubes.

The GRISOTUB MS is an efficient, manually or motorized driven closing device for Metal tubes. Depending on the tube diameter, 2 to 8 tubes can be used in one operation be closed. The necessary multiple tube holders are specially designed Made to your requirements (about 10 tube samples required).

Two different model types are available.

A model (MS-2/3) for double and triple fold.
(manual or motorized available)

A model (MS-S) for saddle fold.

(MS-S only available manually)

 

 

Download
Product data sheet manually Version
GRISOTUB MS.pdf
Adobe Acrobat Dokument 283.7 KB
Download
Product data sheet semi-automatic Version
GRISOTUB MS M.pdf
Adobe Acrobat Dokument 285.1 KB

features

 

  • Efficient closing system for the serial folding of 2 until 8 metallic tubes (dependent on tube diameter)
  • Type GRISOTUB MS-2/3: for double or tripple folds - manual version 
  • Type GRISOTUB MS-2/3 M: motorized version
  • Type GRISOTUB MS-S: for saddle folds
  • the multiple tube holders are customized - according your tube samples
  • Up to 1500 tubes per hour can be perfectly folded (depends on tube diameter) 
  • GRISOTUB MS - the ideal machine for folding of metallic tubes in small and middle sized production lot

 

working method of GRISOTUB MS manually



GRISOTUB MS-2/3 for double- and triple fold
You choose the desired folding type by an easy height adjustment. The filled tubes are loaded into the multiple tube holder. This is placed manually between the sealing guides. The end of the tube is then squeezed (avoiding any overpressure in the tube). Once the holder is centred in the unit the tubes are closed by two turns of the hand crank.


GRISOTUB MS-S for saddle fold
Saddle fold is used in those cases where coding of both sides of the fold is desirable or required. The four folding points give a better seal. The GRISOTUB MS-S is the only equipment of its type that can produce a saddle fold economically and reliably. Having sealed the tubes by two turns of the hand crank in the same way as above, the multiple tube holder must be turned 180°. A third application of the crank produces the saddle fold.

 

 

working method of GRISOTUB MS motorized


GRISOTUB MS-motorized
You choose the desired folding type by an easy height adjustment.
The filled tubes are loaded into the multiple tube holder. This is placed manually
between the sealing guides. The end of the tube is then squeezed (avoiding any
overpressure in the tube). After insertion of the holder in the appliance the closing
process is released by pushing the buttons on either side of the appliance.